Perform Service Ram 3500 (Must-Know Things)

The Ram 3500 is a Heavy Duty full-size truck with awesome towing power and payload capacity, and it’s an award-winning truck.

In addition, the ram 3500 has one of the best operating systems in the Ram categories of truck automobiles.

This article will discuss everything you need to know about the perform service ram 3500.

The perform service ram 3500 connotes a self-diagnostic and safety measures imputed within the vehicle, which alerts the owner in case anything goes wrong and warrants immediate repair.

Perform Service Ram 3500 Meaning?

The perform service ram 3500 is a self-diagnostic technology ascribed within the ram 3500 cars.

These safety measures notify the truck driver of the time when specific services are required for the optimum maintenance of the truck.

The perform service ram 3500 is mostly seen on the truck’s dashboard in illuminated write-ups or symbols.

The perform service light is preceded by a perform service message, showing you the areas where maintenance is needed.

Thus, you need to take your truck to a professional to look at certain parts.

Check the engine light, change the fuel filter, engine air filter, CCV crankcase ventilation filter, engine oil, lack of automatic transmission fluid, tire rotation, or maybe something similar. 

What Happens to Your ram 3500 When the Performance Service Message is Ignored? 

Regular automobile maintenance should be your major priority to make it function at its peak.

Preventive maintenance, they say, is better than curative maintenance.

However, when the perform service message is ignored, the following might result;

• You might spend more money on subsequent repairs.
• There is more downtime in your company.
• Your vehicle works under duress.

How do you Clear the Perform Service on a Ram 3500?

The perform service message on a ram 3500 can be cleared by turning your automobile’s ignition switch without starting it.

Then, you press and release the brake of the car two times, and then you slowly depress the accelerator pedal fully two times within 10 seconds.

After you turn off the ignition switch, you can do all these within 1 minute.

If the above methods don’t work for you, you should shut all the truck’s doors while trying to clear the perform service on your ram 3500.

When you’re done, you turn off the key, open the driver’s door, and then you’re home and dry.

Note that the speed with which the brake and the accelerator are pressed matters when trying to clear the performance service on your ram 3500.

Furthermore, when perform service indicator pops up, and you try clearing it with no positive result, try checking what was wrong manually.

First, check those respective areas like; the calipers, tires, engine oil, ventilator filter, air filter, and injector.

Then, try fixing them and clearing the performance service indicator when you’re done with that. You need to know Ram 3500 Vs. 4500 (In-Depth Comparison)

How Long Can One Drive With an Unclear Maintenance Light?

It’s a bad idea to drive your ram 3500 with the maintenance light on because a problem has been detected and needs immediate repair.

The perform service message comes up at every 67,500 miles in some models and 70,000miles in others.

However, if your professional observes the car and gives you the go-ahead to drive for a while, you can.

But some situations may warrant fixing it as soon as possible.

Perform Service Ram 3500 Reset

Perform service light on your ram 3500 resets can be done by; 

• Turned the ignition key to ‘RUN’ without starting the car’s engine. Putting on the ignition means the vehicle system is on, but the engine is off at that moment. 
• Then, the brake pedal should be pressed and released two times.
• Afterward, the gas acceleration pedal is fully depressed slowly twice within 10 seconds. 

After the above steps, your ignition should be turned off completely, and your performance service light should be reset.

To verify this, you can start your engine while checking the dashboard to see if they perform light service is still on.

If the reset check engine light is still on, the processes above could be repeated.

If it’s still on after this, verify that the process was followed keenly and try it again.

If it proves abortive, you may have to consider the owner’s manual because every car has this information and may also tell you what the specific light indicates. 

#1. Oil Change Indicator – Reset

Most vehicles are equipped with an oil change indicator system. This system alerts the driver that the time to change the engine oil is due.

The following processes are used for oil change indicator reset:

• First, you must turn on the ignition switch without starting the engine.
• Then the accelerator pedal is fully pressed slowly three times within 10 seconds.
• Turn off the ignition.
• Finally, start the engine and check if the disappearance of the indicator successfully evidenced the reset. Of course, the whole process might be repeated if unsuccessful.

How do I Get Rid of the Perform Service on my Ram 3500?

Perform a service message on your ram 3500 can be gotten rid of by putting on the ignition without necessarily starting the car.

Apply pressure on the brake and release it two times, and also fully depress the gas accelerator slowly two times within 10 seconds.

All these processes are carried out within the space of 1 minute.

Switch the ignition off and then restart the car engine to check if you’ve gotten rid of the performance service notification. Perform Service Ram 2500 (Beginners Guide).

Can you Get Rid of the Perform Service Message?

Yes! You can get rid of the performance service on your ram 3500 Heavy Duty truck by adhering to the methods above, taking into cognizance the speed with which the brake and the gas accelerator are depressed.

For instance, the gas accelerator is depressed slowly and should be within 10 seconds. 

How do you Reset the Perform Service on a 2021 Ram 3500?

You reset the perform service indicator on the dashboard of your 2021 ram 3500 by following the steps above.

First, switch on the ignition, press and release the brake twice, slowly depress the accelerator pedal fully, switch off the car, and restart the engine to verify.

To fully understand how to reset the 2021 ram 3500,  you must fully assimilate the vehicle’s manual, making reset easier.

In addition, there are other advantages the 2021 model has over the 2019 model, which are:

• Infotainment has been equipped with the latest technology and software, making it stand out.

• It comes in three variants of an engine; a 6.4-liter V8 HEMI, a 6.7-liter Cummins turbo diesel 16 engine, and a six-cylinder Cummins.
• It has a towing capacity of about 37,100 pounds.
• It was made for its application in Heavy Duty truck activities, stronger, bolder, and more ferocious than its predecessors.
• An excellent interior design
• It is safer compared to its predecessors.

Conclusion 

The perform service ram 3500 signifies a self-diagnostic within the vehicle which alerts the owner when there is a need for maintenance.

You can easily reset the perform service message of your ram 3500 with a few easy steps or consult your owner’s manual for help.