Cadillac XT6 Backup Camera Not Working? (Reasons & Solutions)

The Cadillac XT6 comes with various safety programs to protect drivers when driving.

One of these safety programs is the rear vision camera located at your car’s rear and connected to your infotainment screen.

It shows you areas behind you when you’re trying to back up or perhaps park your car and is a better alternative than turning your head.

Experiencing backup camera issues is a big deal, but what could be the reason for such an issue?

Often, the cause of this Cadillac backup camera could be minor concerns that a reset can solve. It may be a faulty electrical connection with the cables, blown fuses, fraying cables, or even your infotainment screen. Major problems like this could require a professional to handle them if it isn’t within your area of specialization.

Why Is My Rear Backup Camera Not Working?

Damages are not exempt to any car components, and below are some reasons why your rear backup camera may be having issues:

#1. Bad Shifter Alignment

A shifter alignment issue is one of the well-known reasons for a rear camera issue and is easy to diagnose. Let’s’ find out whether Cadillac XT6 Have A 360 Camera?

You only need to have an individual stay behind your Cadillac while engaging the reverse mode. Ask them to verify if the backup lights turn on.

If it doesn’t, it suggests that your Cadillac’s electrical interface is aware of the reverse mode.

This problem could be because of the deformation in the coax cables used for electronic signals, which causes much resistance.

For this reason, many opt for a rear camera mirror as they give a higher definition image and work regardless of what mode they are in, reverse or drive. 

Rear camera mirrors integrate the conventional rear cameras and the rearview mirror, which offers better advantages.

Unfortunately, such problems are prevalent during the misalignment of car components.

#2. Bad Camera

Rear vision cameras are vulnerable to various elements like dirt and water since they’re in an unprotected area; hence they need to be durable.

But this doesn’t mean that they’re exempt from damage as they can undoubtedly get damaged and go out in the Cadillac XT6.

Also, if the camera turns back on after minor adjustments, it’s likely to go bad soon, but it won’t turn on in worse cases.

#3. Short Circuit

Although not the most probable reason, short circuits are another cause of rear backup camera issues.

In some cases, it could result in problems for the reverse camera, hindering its smooth operation.

There are two types of short-circuit issues, and they are:

#1. Short to ground

Short to ground circuit problems occur when current streams from the circuit to the Cadillac and mostly happen due to improper insulation of electrical cables.

It can also impede the normal functioning of car elements which could affect the reverse lights of the backup cameras.

#2. Short to power 

Short-to-power circuit challenges happen because of the proximity of circuits and occur when improperly insulated wires come in contact.

Therefore, it causes systems to malfunction, especially when wires are mistakenly connected.

#4. Blown Fuse

Blown fuses are a prominent cause of Cadillac’s backup camera problems.

But remember that the first occurrence of fuse problems is an issue but not a cause of immediate danger.

It would be preferable to replace the old fuse, and if the issue stops, that’s alright.

But if it doesn’t, you may be having a short circuit problem, either a short to ground or short to power.

Why Is My Camera Just a Black Screen?

In most situations, having a black screen is a display problem and not from your backup camera, so have a professional inspect your car’s electrical wiring.

Also, since many people install their backup cams at home, they could have connected it to an AUX instead of the video feed.

Hence, ensure you properly connect the display to a system that will provide it with sufficient power.

In another case, the monitor needs to be repaired or even replaced. Another possible reason for this is reverse programming. 

Most Cadillac users program their rear camera from their Cadillac user experience (infotainment system) to only function in the reverse mode so ensure you’ve tried doing that before concluding.

Furthermore, if the infotainment screen turns on but doesn’t say anything about signal issues, the backup camera is the problem, so check it and get a replacement if it’s needed. 

Or it could also be that the camera is not powered on.

The best technique to diagnose the reason for a black rear camera screen is to inspect the car’s and backup cam’s wiring.

You can find help on this in your owner’s guide. Ensure to check if all wires are accurately placed after checking the wiring graph. 

Most Cadillac users believe a broken camera causes this black screen problem, especially if the car was involved in a rear collision with another object or car.

Such events can lead to mild damage to the camera, progressing to an advanced issue. 

In conclusion, having a professional check your vehicle, wiring, and other vital components will spare you the stress of doing it yourself, especially if you have no ground knowledge but just following a manual.

How Do I Reset My Backup Camera?

There are two different methods to reset a backup camera.

The first, effortless technique is using the reset button, which involves examining the zone further beyond the back windscreen to discover the backup cam. 

You’ll see a regulator on the camera with “reset” boldly written on it. Push down this reset button for 20 seconds maximum.

After that, the camera reset is complete and will work as it did initially.

Another method to reset the rear vision camera back to its original setting is:

• First, deactivate the car and open the bonnet.
• Next, detach your car’s battery and set it aside.
• Power your car on and push the horn, switch on the lights or do anything provided it will evacuate the remaining power in the vehicle.
• After that, you can now activate the car.
• Finally, put back the battery into your car, and you’re set.

Does a Reverse Camera Have a Fuse?

Yes, reverse cameras have fuses located below the steering wheel or glove box.

They use a 3-amp fuse wire to transmit energy to the rear cameras. Also, fuse issues are the primary cause of a faulty rear backup camera.

Fuses are safety equipment in a circuit that protects your car and electrical components from excessive current.

Blown fuses mean your electrical wiring is vulnerable to damage, and a replacement is in order.

Fuses are not only crucial to reverse cameras but the car generally. In addition, they’re an affordable protection device, and below are some of the advantages of having them:

• Fuses are inexpensive but still offer sufficient protection to electrical circuits to stop them from going past their current limit.
• There is no complexity involved in the performance of fuses as they’re simple to use and automatic.
• Fuses can stop a short circuit from exceeding their current without generating flame, unusual sounds, or fumes.

Also read: Cadillac XT6 Video Recorder SD Card Location (Explained)

How Much Does It Cost to Repair a Backup Camera?

The cost of the backup camera ranges from $150 to $400 and an additional $600 for the labor.

But luxury cars like a Cadillac may cost a little over that, depending on what type you choose to get.

When the problem is as minor as blurry images or a brown color showing on your display screen due to dirt, it’s as easy as wiping the rear camera.

You should expect that to happen frequently as the rear camera is constantly exposed. After that, you can turn on your car and put it in reverse mode.

If the screen doesn’t show any images, you may have to replace your Cadillac’s user experience system, costing around $500, but a black image is the camera’s fault. 

In other cases, it could be the most common cause of electrical problems and blown fuses, so pop your fuse box and verify which fuse sends power to your camera and screen.

Then, detach the previous fuse and install a replacement, after which you can turn on your car as the backup cam should go fine.

Summary

Backup cameras are part of the safety programs displayed on your Cadillac user experience system to enable you back up safely and prevent accidents.

However, rear cameras are not exempt from damage, so any unusual signs noticed should be verified, and replacements should be made if necessary.

You could also opt for a rear camera mirror to give you double the advantage of reflected images behind and camera footage.