RAM 1500 Jack Stands (Things You Must Know)

Car jacks are very convenient tools for lifting cars to remove and mount tires or fix other problems.

Also, car jacks provide an easy and swift way of raising vehicles without spending a lot of energy or involving many people. 

However, most cars and trucks have jacks that are peculiar to them and would not function properly if used on another.

This is also applicable to RAM 1500 trucks, so which jack stands can support them?

Three-ton Jack stands effectively jack up RAM 1500 trucks. However, this is just the minimum capacity for a jack that can hold these trucks. Consequently, three-ton jacks, four-ton jacks, and higher jacks are the best jack stands for these RAM 1500 vehicles.

Where To Put Jack Stands For RAM 1500?

It is recommended that you always place jack stands under your RAM 1500 truck’s lifting point.

However, you should ensure that there is adequate space at every jack point to support the grip of your jack stand.

So, when you release the hydraulic pressure from your affixed floor jack, the jack stand holds the weight of your truck if you’re using a properly rated jack.

Also, the stand has to be evenly placed for this to work.

On the other hand, other car owners prefer placing jack stands under the block of their engines.

However, this causes unnecessarily high pressure on the engines and pushes the block to crash.

But experts have posited that it is safer to raise the front side of your RAM 1500 track. And that you should raise it from the front wheel of the driver’s flank.

What Size Jack Stands Do I Need For My Truck?

You can get several different types and sizes of car jacks, but every jack does not match every truck.

So, knowing the type of jacks that is safest for lifting your truck is pretty important.

But to do this, you will have to be informed about the design, jack points, weight, and the impact of your truck. 

So, here are the factors that determine which jack stands to use on your truck:

#1. The Weight Of Your Truck

Every car jack has a specific rating for handling specified weight scales. This exact rating is engraved on the car jack using sticker paper which can be easily seen.

But still, keep in mind that you would not lift your whole truck using one jack. So, this rating does not mean that this single jack possesses the capacity to lift that car.

Unlike small cars and sedans, which a two-ton jack can lift, trucks need twice that strength in most instances.

But this is so because there is always the need for a significant safety margin to avoid causing damage to your truck.

#2. The Specific Fittings

Floor jacks and bottle jacks which are the most popular car jacks, use hydraulic fluid to raise vehicles. But floor jacks possess wider footprints than their counterparts.

Also, they carry handles at a specific end and lifting pads on opposite sides. 

These jacks are pretty excellent for regular fixes and are pretty convenient because you can get them in different sizes for your differently-sized trucks.

Also, you can easily pick a jack stand that fits properly on your truck’s jacking spots specified in the car manual.

If you’re an owner of a truck, you probably have a bumper jack from the car factory.

And these specific car jacks carry higher components that hold firm under your truck’s bumper.

However, others may not precisely recommend them for intense mechanical activity.

#3. Compatibility Between Jack Stands And Car Jacks

This is another essential factor to consider when picking a specific size of jack stand for your truck. Particular jack stands to go with certain carjacks.

Jack stands being solid metal holds that support your car after it has been jacked up and help hold the entire weight of your truck.

Additionally, the tonnage of your truck also determines the size of the jack stand you’d need to hold it in while you work underneath.

This is a critical choice because a slip of the jack stand could be potentially lethal. 

Is A three-Ton Jack Enough For A RAM 1500?

A three-ton jack can hold up your Dodge RAM 1500.

This is because a jack that conveniently holds at least three-quarters of the entire weight of your truck would safely handle one or two corners of your truck. 

The Dodge RAM 1500 truck weighs about 4,800 to 6,300 Lbs. This indicates that the three-ton jack would be the most secure jack to lift it.

This is because the estimated capacity of the three-ton jack is 6,000 pounds. 

But still, before lifting a truck with a three-ton jack, you should be sure of its integrity and strength.

The resilience of jack stands is as important as their capacity. Using an old or untested jack poses a danger not only to the truck but also to you.

Do I Need Two Or Four Jack Stands?

If you’re looking to lift only one end of your truck, you will need two jack stands for the driver and passenger sides.

However, four jack stands are ideal if you want to raise the entire truck.

In addition, you may need thick plywood to prevent the jacks from getting submerged if the floor consists of soft material such as grass or asphalt. 

When using two jack stands to lift your truck, lock them to an equal height and do not use wood blocks to increase the height.

Wood blocks are prone to slippage and breakage. So, instead, purchase higher jack stands.

On the other hand, lift and place the truck’s front end first when lifting the entire vehicle.

Ensure to push the front end to the maximum height attainable by your car jack and stand before moving to the rear.

Then, gently lift and hold the vehicle’s back end in place using the second sentence of jack stands. 

How Do You Jack Up A RAM 1500 2020?

As an owner of a Dodge RAM 1500 2020 truck, you will have to jack up your truck once in a while.

This is essential for making repairs and replacing major truck components.

Many people prefer to place the jack stand beneath the A-Arms, but this increases pressure on the bushings, and this can make your bolts crack.

So, here are a few steps to jack up your RAM 1500 2020:

• First, put a jack under the truck’s frame, a little behind the front wheel of the driver’s side. Then, adjust the bottle jack that comes with the Dodge RAM to fit in the truck’s center under its frame.
• Jack the driver’s side of your truck off the ground, put a jack stand under the frame an instant at the back of the bottle jack. Then, ensure that the truck’s front tire lifts from the floor, giving you enough space to move under the car and make your repairs. 
• Ease the RAM 1500 2020 truck back on the jack stand, but confirm to be sure that the tire at the driver’s side remains suspended. 
• Carry out this same process on the other side of the RAM truck to lift it. 

Final Thoughts

Jack stands are a super-efficient tool for holding your vehicles in place after lifting them using car jacks.

So, three-ton jacks are enough to jack up your Dodge RAM 1500 trucks.

This is because they fit the design of those trucks and have a strength allowing them to carry about 6,000 tons which is the weight range of RAM 1500.