Ram 1500 Axle Nut Size (Beginners Guide)
There is no saying what can happen or go wrong when the wrong size of axle nut is put in place to secure a wheel to the axle of your Ram 1500.
But, I can tell you that the outcome could be very disastrous and even life-threatening.
Therefore, securing the wheel with the right axle nut should never be taken lightly.
As this article unfolds, we will identify the Ram 1500 from 2001 to 2019 and their different axle nut sizes.
If you stay poise and give your undivided attention, I am sure you will have something new to learn at the end of this article. So, what is a Ram 1500 axle nut size?
A Ram 1500 axle nut size is a reference used for the particular nut required to fit in or serve as the hardware component that gives security to the wheel that is attached to the axle of your Ram 1500. Apart from security, these nuts play a vital role in the vehicle’s movements by ensuring stability.
2001 Ram 1500 Axle Nut Size
The Dodge Ram 1500 series has a 175- horsepower 3.9-liter V-6 engine as the base engine installed for the two-wheel-drive regular cabs.
And it also has rear-wheel antilock breaks as its standard.
With this powerful Ram 1500 of 2021, Dodge was able to infuse heavy excitement into the already booming pickup market.
And with the specs you see above, Dodge gave security to the wheel of the Ram 1500 with an axle nut size of 14mm.
2003 Ram 1500 Axle Nut Size
This vehicle comes with compelling engine choices (like the revised Hemi V-8) in terms of high gear.
It has a significant payload and towing capacity and an excellent interior, and although it is in a highly competitive market, it stands firm.
Likewise, the fuel economy is superb concerning low gear but scary in the Hemi.
Even though you will quickly see it as a bouncy ride, I assure you that driving it without a payload might give you one of the best feelings ever.
Its power steering, tilt-adjustable steering wheel, five-speed manual transmission, ventilated front disc/solid rear disc brakes, full-size spare tire, and a 4-wheel ABS.
There is a need to secure your vehicle with a Ram axle nut size of 11/16.
2004 Ram 1500 Axle Nut Size
The 2004 Ram 1500 also goes by the 2004 Dodge Ram SRT 10 pickup truck. It is also addressed as a toy, being an expensive gateway vehicle.
It looks more like a muscle car than a truck that is neither built for mountains nor snow but seems good for escape.
The 2004 Ram 1500 has an 8.3-liter Viper V-10 engine that can carry it 5,000 pounds body from 0 to 60 miles per hour within 5.2 seconds.
And his body will have to balance on wheels that are firmly secure with its 36mm front axle nut.
2005 Ram 1500 Axle Nut Size
The 2005 Ram 1500 heavy-duty pickup comes with a five-speed manual transmission on V6 and V8 engines, improving the previous year.
This vehicle comes with three trims ST, SLT, and Laramie, and it has a spindle axle nut size of 55mm (2-1/8-16 inch thread size) for the Round-slotted type.
The Hex type has a spindle axle nut of 60mm (1-13/16-16 inch thread size).
2007 Ram 1500 Axle Nut Size
2007 Ram 1500 is a six-passenger, four-door pickup, and four-wheel-drive truck.
It has a 6.7-liter Cummins I-6 engine that generates 650 horsepower, a 1,500 lb-ft of torque, and a four-speed automatic transmission.
There seems to be a ¾-16 inch thread axle spindle nut and a ⅞-14 inch thread axle nut.
These nuts play an essential role in holding the vehicle in form since its design allows it to carry much load, which explains why it has a four-speed automatic transmission.
2008 Ram 1500 Axle Nut Size
Yes, this power wagon still enters 2008 as the most rugged jungle truck that goes against boulders, sticky mud, and steep ravines.
But one thing is that it performs poorly for world driving. It is stiff with rigid suspensions that are perfect for off-road driving but not for the real world.
You would agree that this vehicle needs its great wheel firmly held together to pull offroad driving.
And this is why you will need a 43mm 1-11/16 6-point nut impact socket which you can get here to remove the hub nut of your Dodge Ram 1500.
2011 Ram 1500 Axle Nut Size
This vehicle’s trims include Sport, ST, SLT, Big Horn/ Lone Star, Laramie, Adventurer, and Tradesman.
But the big fuel tanks are what you can see in the outdoorsman models.
The Ram 1500s has a 5.7-liter Hemi V8 cylinder-deactivating capability and gives between 16.6 and 18.1 mpg.
Nevertheless, the axle nut size for the 2011 Ram 1500 is 36mm, while the nut that holds the hub in place is 18mm.
2013 Ram 1500 Axle Nut Size
Ram 1500 of 2013 came with a new Pentastar V6 engine and an updated version of the Hemi V8 engine.
All models of the V6 engine came with an eight-speed automatic transmission with active shutters and started to stop.
The Hemi models also had an eight-speed transmission.
The recommended axle nut size for this vehicle is 36mm (1-⅜ inch), which is more fitting for securing the wheels.
And this is possible due to the change from the leaf springs to coil springs in the 2013 model.
2014 Ram 1500 Axle Nut Size
The first half-ton pickup with a turbodiesel engine is the Ram 1500 of 2014. The standard for the 2014 Ram 1500 is a capless fuel filler system.
In addition, it has a front park assist and two other colors available: the Blue Streak and Granite Crystals.
The axle nut size found in the Dodge Ram 1500 is 36mm (11/16) in size. And this will fit well for the wheel since the vehicle carries a 407 lb-ft 5.7-liter Hemi V8 engine.
In addition, it comes with 304 horsepower and a six-speed or eight-speed automatic transmission.
2015 Ram 1500 Front Axle Nut Size
The overall view of the 2015 Ram 1500 is that it comes with nine trim levels, three engines, two transmissions, three box lengths, a rear or four-wheel -drive configurations, and three cab styles.
The front axle nut size of the 2015 Ram 1500 is 36mm. And this can provide the wheel with security that both engines are available in their trims (the V6 and V8 engines).
These engines are also appropriately paired with both six-speed and eight-speed automatic transmissions.
2016 Ram 1500 Front Axle Nut Size
The two and four-wheel-drive models received three engines and two transmissions released in the 2016 Ram 1500.
The 3.6 V6 engine comes with a 305 horsepower at 6,400 rpm and 269 lb-ft at 4,175 rpm, paired to an eight-speed automatic transmission.
According to the Dodge Ram forum, the front axle nut of the 2016 Ram is 36mm.
And this axle nut is fitting because the 2016 Ram 1500 appears to have the building for carrying much load.
2017 Ram 1500 Front Axle Nut Size
The drive quality of this vehicle seems to be very good, and this is possible with the aid of air suspension, which is unusual for high-capacity pickups.
In addition, it has a wide engine selection, top-quality interior, great storage, and high capability.
The front axle nut size for a 2017 Ram 1500 is 36 mm. And you would agree that this axle nut fits all 11 trims with all three engines that carry the eight-speed transmission.
2018 Ram 1500 Front Axle Nut Size
Ram 1500 of 2018 is available in a regular cab that carries an 8-foot or 6-foot-4-inch bed and a quad cab with a 6-foot-4-inch bed.
And if properly equipped can tow up to 10,620 pounds. All engines come with an eight-speed automatic transmission as the standard.
But the 5.7-liter Hemi V8 is the only one with a six-speed automatic transmission. The front axle not size for this Ram 1500 is 36mm.
2019 Ram 1500 Front Axle Nut Size
The 2019 Ram 1500 has six trims and very safety features, like the lane departure warning, adaptive cruise control, and forward-collision warning.
In addition, it has a towing capacity of 12,750 pounds and carries a payload of 2,300 pounds.
Note that this vehicle has a mild hybrid system and user-friendliness with a touchscreen system of 12.0 inches. The front axle nut size is also 36mm.
Conclusion
A Ram 1500 axle nut size is a reference used for the particular nut required to fit in or serve as the hardware component that gives security to the wheel that is attached to the axle of your Ram 1500.
And we have come to see the various sizes of axle nut used for ram 1500 and even nut impact socket.
