Engine Fault Service Now Ford Escape? (Read This First)

Ford Escape has an ECM (Electronic control model); this computerized device helps alert the driver on possible issues that need immediate attention in the automobile.

Once it identifies a faulty electronic control center problem, your computer indicates by notifying you through your check engine light and turning it on.

Unfortunately, many users have been experiencing this issue, and many still don’t know the meaning of such warnings.

Ford Escape engine fault service is the maintenance of your automobile’s engine. When such a warning comes, it tells you something isn’t right with your car. Most automobiles like yours could experience glowing or flashing, whichever way it indicates, don’t take any warning lightly.

What Does Engine Fault Service Now Mean on Ford Escape?

Engine Fault Service Now Ford Escape

Ford Escape is a unique automobile that gives you a comfortable ride, but maintaining it takes a great deal.

As a result, most Ford Escape models starting from 2018 have the ECM (Electronic control module), every driver’s assistant.

The ECM is a computerized electronic device installed on all Ford Escape to assist its users with issues coming from your engine or any possible damage to your dashboard.

Engine fault service now is an alert to show that your engine needs attention. If you check your automobile, you’d see it as “check engine” or “service engine now.”

It often alerts with a yellow light on your dashboard. You’re not a technician, so opening your engine to loosen or tighten anything is very risky as it could lead to further damage to your engine. 

The best action is to drive your automobile to an authorized technician for repair. Most times, it’s an added advantage to know what the possible cause could be that led to the alert from your check engine light on your dashboard.

Once it recognizes any fault from your automobile engine part or any faulty sensor, it immediately stores the “trouble code” in the ECM memory.

What Does the Check Engine Light Codes Mean on My Ford Escape?

The check engine light is an indication that notifies you that your car’s engine needs immediate attention.

When this amber or yellow light beeps or stays, it stores an engine code or a trouble code in the ECM (Electronic Control Module).

Have you heard of DTC? Yes, “Diagnostic Trouble Codes” are similar to check engine light codes.

One of the works of the ECM is to store automotive computer codes in its system. 

The ECM is also called OBD (on-board computer diagnostic system). There are numerous codes your check engine light can illustrate, which include:

  • Communication problems
  • Computer output circuit problems
  • Emissions control problems
  • Ignition system failures
  • Loose Gas Cap or Missing Gas Cap
  • Bad Spark Plugs
  • Old or Weak Battery
  • O2 Sensor
  • Fuel and air metering systems issues

However, your escape check engine could mean a lot, and it’s good you get a brief about possible attacks you may be facing unconsciously.

What Are the Possible Reasons for Check Light to Come Upon Ford Escape?

Your check light could come up for many reasons, but one of the common issues users face is refusing to replace a bad gas cap or fasten it.

Since we have different models of Ford Escape, it’s crucial to know that the behavior of the service engine light in your automobile could be further from others; it could glow or flash, but that does not mean less in all I’ve said.

Once you get notified, do well to visit your mechanic to get your vehicle fixed. Some automobiles’ check engine light has the two; they could glow or blink.

Once it shines, it alerts you on a bit of servicing, but you should drive straight to your technician immediately because your automobile is in great danger once it continues blinking.

Unfortunately, many users neglect this due to ignorance, but the earlier you attend to your vehicle, the lesser you pay for damages.

Below are reasons your escape check engine could be notifying you of:

#1. Possible Causes of Ford Escape Check Light Alert

Possible Causes of Ford Escape Check Light Alert
  1. Amongst the most popular causes is a weak, broken, or misplaced gas cap. That gas cap on your vehicle has numerous functions that you should handle with care.

    First, it closes the gasoline system and helps preserve pressure in the fuel tank when you aren’t driving, preventing gas fumes from being emitted. 

If you’re using an old gas cap or one that has a leak, you could lose fuel due to evaporation. Fortunately, replacing a gas cap is not expensive. 

  1. The battery could either be below in power or completely dead. Car batteries today last far longer than how they were a long time back, and have lesser need to be maintained.

    If they however run out and you need to replace them, the cost of a replacement varies depending on the Ford model you drive, so check out our current servicing coupons and specials.
  2. There is a vacuum leak in your Ford Escape. A vacuum system is included in every Ford Escape and serves various purposes.

    By directing vapors as gasoline evaporates from the engine, the vacuum system also helps to limit dangerous emissions. 

A vacuum leak could be the cause if your RPM surges at odd times. In addition, vacuum hoses can get dried and break over time, especially if exposed to heat or cold.

  1. Your Oxygen Sensor requires recharging. The O2 sensor determines how much oxygen is present in your exhaust system.

    If there is too much oxygen in the exhaust, your fuel burns faster, and your automobile is less accessible in fuel economy. 

So, if you don’t replace your O2 sensor, what happens? A defective sensor can harm your catalytic converter and spark plugs and lower your miles per gallon. Does Ford Transit Connect Come In AWD? (Let’s See).

What Does Engine Fault Service Now Mean?

Summary

Ford Escape has made it easy for its users to enjoy a comfortable ride.

However, all of  Ford Escape’s new models have the ECM (Electronic Control Module), so do well to use your check engine light to know if you are good to go.

Once you notice any indication that you don’t understand, it’s essential to visit your mechanic to get it fixed.

Similar Posts