Cadillac Escalade Remote Start not Working? (Reasons & Solutions)

The remote start feature has numerous benefits that many Cadillac Escalade car owners enjoy, especially on hot and cold days.

So, when the remote start feature stops working abruptly, it becomes a huge dilemma. Now, what could be the cause of this? 

The Cadillac Escalade remote start may cease when the vehicle is not in park mode (P). It can also stop its functionality when the vehicle’s hood is open, and the remote starter switch is off. 

What Causes Your Remote Start to Stop Working? 

Many factors hinder the functionality of your remote start, making it difficult for you to operate your vehicle remotely.

The following are some factors that stop your remote start from working properly. 

• Unlatched hood: this happens when you open the hood of your car without closing it well. This prevents your remote start from working completely. 
• Improper starting procedure: when you fail to follow the proper remote start procedure, your remote start will not function. 
• Your vehicle is not in park mode (P): this problem is very common among car owners as they often fail to park their vehicles. For example, your Cadillac Escalade remote start will not work if your vehicle is in motion and not in park mode. 
• Hazard lights are on: this usually occurs when you leave the hazard lights on in your vehicle. The lights hinder the remote car starter from performing its function. 
• Coolant and oil pressure: when the coolant temperature is incredibly high and the oil pressure very low, the remote start fails to function. 
• Too many remote start attempts: usually, this happens when you activate the remote start feature 2-3 three in succession. In this case, the remote start fails to function completely due to many attempts. 
• The remote starter switch is off: this often happens to many car owners due to forgetfulness. The remote start system will not work when you fail to switch on the remote starter. 
• Malfunction of the Check Engine Light or Malfunction Indicator Lamp (MIL): if the MIL begins to illuminate, your remote start system will not work.
• Dead key fob battery: most times, the problem comes from your Cadillac Escalade key fob, especially when the battery is very bad. 

How Do I Fix the Problems With My Cadillac Escalade Remote Start? 

Fixing the problems of your remote start is quite easy as you can do it without consulting an expert for assistance.

Now, what are the solutions available to fix these problems? Below are some of them. 

• Check and replace the key fob battery: it’s important to check your Cadillac Escalade key fob regularly as the problem might be from the key fob. Furthermore, you need to replace the battery, especially when it fails to work. You can do well to purchase a 2032 lithium cell battery suitable for your key fob. 
• Close the hood at all times: before you activate the remote start feature, you need to close the hood/bonnet of your car properly. You should only open the hood when you want to check the oil level, conduct regular checkups, fix a problem and when you want to service your vehicle. Afterward, close it tightly; otherwise, the remote start will not work. 
• Follow the remote start procedure: this procedure is straightforward and contains important instructions on activating the remote start feature. You can do well by checking your owner’s manual for the right procedure. 
• Ensure your vehicle is in park mode (P): car owners tend to make one mistake by activating the remote start feature when their vehicle is in motion. Therefore, you must always make sure your car is in park mode before you attempt to turn on your remote start. 
• Check the coolant and oil pressure: always make sure the coolant temperature and oil pressure are normal. You can do this by checking them regularly to avoid any problems. 
• Ensure the remote starter switch is on: always remember to switch on the remote starter as the remote start feature will not work if the remote starter switch is off. 

Cadillac Escalade Key Fob not Working 

The Cadillac Escalade key fob is an essential part of the vehicle and assists car owners in activating the remote start system.

However, some crucial factors prevent the key fob from performing its function.

Here are some factors that can cause your key fob to fail 

• Dead key fob batteries: if you begin to notice that your vehicle is not reacting to the commands and signals from your key fob, it”s highly possible that the batteries are dead. When you discover that your key fob is not working due to worn-out key fob batteries, the best solution is to purchase the right batteries and replace them immediately. Once you replace them, your key fob will be good as new. 
• Internal damage to key fob/keyless entry remote: normally, the functionality of the key fob solely relies on the communication between a transmitter and a receiver. However, if one or two of these elements undergo severe damage, the key fob will not work the way it was intended. 
• Worn-out buttons on the key fob: this happens when you press the buttons on the key fob repeatedly. Pressing the key fob buttons can wear down the internal components. In this case, one button may work while the others may fail to work at all. 

How Do I Turn On Remote Start on My Cadillac Escalade? 

Activating/turning on the remote start feature is extremely easy, and you can do it at your convenience. Read more if Escalade Have 4-Wheel-Drive?

To activate the remote start feature on your Cadillac Escalade, you must adhere to the following steps. 

• Step 1: Press the Lock button on your Cadillac Escalade key fob.
• Step 2: Press the remote start button twice on your Escalade key fob.
• Step 3: Once you complete this process, the turn signal lights will flicker, and the engine will start automatically. 
• Step 4: Immediately after you remotely start your car, your vehicle’s engine will run for approximately 15 minutes. Afterward, it will automatically shut down. 

With the remote start feature, you can warm up your engine and turn on the air conditioning in your vehicle on hot days.

Furthermore, you can control other features such as heated and ventilated seats, climate control, and the heated steering wheel. 

Final Thoughts

Although the remote start feature appears flawless, some factors such as dead key fob batteries could hinder its full performance.

Furthermore, other problems such as an unlatched hood and improper starting procedure could prevent its functionality.

Notwithstanding, you need to follow the right steps and check your vehicle thoroughly before activating the remote start.