Jeep Gladiator Remote Start Not Working? (Easy Fixes)
Experiencing some common technical issues with the Jeep remote start is one of the most common complaints from Jeep owners.
So yes, it’s not new for the Jeep Gladiator remote starter to refuse to work.
However, there is always a reason behind every fault and, in the same vein, a solution to fixing the issues.
This article provides a detailed discussion of the reasons for the Jeep remote not starting working and possible solutions.
The most common reason the Jeep remote start to stop working is because of a weak or dead key fob battery. A weak or dead key fob battery wouldn’t allow the key fob remote to communicate with the Jeep receiver. Although sometimes, the issue may be from the Jeep remote start; hence the Jeep will not start.
Why Is My Jeep Remote Start Not Working?
If your Jeep remote starts to stop working, there are high chances that it is because of the key fob battery.
However, it is not always the case as there are other possible reasons why the jeep remote start will not work.
Some reasons may result from users’ fault, but it is usually a possible mechanical fault relating to the existing factory fobs.
As mentioned above, some of the reasons are simple user errors, while others are mechanical faults.
While you can correct user errors, some mechanical errors require more professional attention.
So, all hopes are not yet lost. Your Jeep remote will start working again if you fix the faulting issue.
But just as the saying goes, “knowing a problem is the first part of solving it.
“Let me take a little time to vividly explain some of the common possible reasons for the Jeep remote not to work.
#1. Dead or Weak Key Fob Battery
A dead or weak key fob battery is the major reason the Jeep starts remote stops working after some use, just as how the Jeep will not start on a weak or dead battery except if you change the car battery.
Lithium cell batteries are commonly used as Jeep key fob remote starters, which will not last forever.
So, whenever the Jeep remote start doesn’t work, the first thing to do is check the key fob remote battery.
If the key fob battery happens to be the reason, changing the battery is the simple solution to fixing the problem.
#2. Wrong Starting Procedure
It may sound minute, but it is very common with new Jeep owners. The starting procedure using the Jeep remote start varies from one vehicle model to another.
Therefore, incorrectly using the remote start will not work because the whole starting procedure is going about.
It is quite basic, but as I said, it is also a possible reason for the remote not working.
So, try following the right procedure to get the Jeep engine on while using the Jeep remote start.
Therefore, to start up most Jeeps, follow the following procedures.
- To start up the Jeep gladiator, using the existing factory fobs, first press the lock button to lock the car. This step is very important as skipping it would prevent the remote start system from working.
- Secondly, press and hold the Jeep remote start button for about three seconds to kick-start the engine. You would sometimes have to hold the button till the turn signal flashes light. By doing so, the vehicle should start without encountering any other fault.
So, if the Jeep starting procedure or the remote is being used wrongly, the vehicle wouldn’t start.
Always be sure that you are doing the right thing in starting the vehicle, as it is a common user error. Does Jeep Gladiator Have Remote Start Feature?
#3. Vehicle Not In Park Mode
By default, no Jeep vehicle start remote button will work when the vehicle is in “park .”You will have to disengage and re-engage the ‘P’ before it works.
It would be best if you took note of this as this is a common user fault, especially from learners.
#4. Coolant and Oil Pressure
The temperature of the car’s coolant and the oil pressure can also prevent the Jeep remote start from working.
If the car’s coolant temperature is too high after use, the remote start system will automatically be disabled.
Also, if the oil pressure is too low, the same repercussions will occur.
Therefore, ensure to seek professional advice on the matter for the proper functioning of the remote start system.
#5. Jeep In Valet Mode
This mode can also cause the start remote system not to work in any Jeep vehicles, which is unknown to many users.
Due to too many remote engine start attempts, your vehicle has been in valet mode.
And for many Jeep models, starting the vehicle with the remote start twice in quick succession will set the vehicle in valet mode.
This action happens when multiple random keys are touched when the remote start is in your pocket or bag.
Also, whenever a Jeep is taken for maintenance services, the vehicle will automatically go into valet mode.
Jeeps in valet mode will be indicated on the media center screen, and the remote start system will not work.
The valet mode is simply a safety measure embedded in Jeeps to reduce car theft or prevent car usage without the owner’s permission.
To fix this, you will have to use the vehicle key on the vehicle, after which the remote start will work.
#6. Engine Warning Light
It is also advisable to always be conscious of the engine light on your car dashboard. The engine light will indicate any fault or malfunction in the engine.
You should know that the Jeep remote start system will not work with the engine warning light on.
Even a loss of the gas cap can cause the engine light to turn on, which will, in turn, stop the remote start.
Therefore, you will have to resolve the issue before using the remote start. The car’s engine is a delicate component; therefore, address any fault before using the car.
Addressing the faulty issue or turning the warning light off will allow the remote starting system to function properly.
How Do I Reset My Jeep Remote Start?
It will be wise to follow the owner’s instruction guide, containing all the necessary information.
The Mopar auxiliary switch is many Jeep vehicles are quite standardized, and only the vehicle guide can help you out. Sometimes you may have to visit the vehicle dealership for assistance.
However, I will show you a simple hack for older Jeep models. It normally works for Jeep models that are older than seven years.
The following simple steps should help out.
- Close the driver’s side door manually or by pressing the lock button on the remote starter.
- Insert the ignition key and turn the vehicle on, for which you’ll do for about ten seconds, then turn the ignition off.
- Repeat the second step three other times, making it four times.
- You should hear a “buzz” sound which tells you that you’re done. You can then claim down and test-run the remote starter; go to your dealership if it doesn’t work.
How Do You Use the Remote Start On a Jeep Gladiator?
Check the Jeep Gladiator instructions manual for detailed guidance on using the Jeep remote start. It is easier to know how to use the Jeep remote start.
It would be best if you always endeavored to browse through the Jeep owner manual for every info you are looking for.
However, using the remote start on the Jeep Gladiator is pretty much an easy thing to do. With the Jeep gladiator remote start, you can only startup, lock, and unlock the Jeep. Does Jeep Wrangler Have A Remote Start?
Follow the following steps to start the vehicle with the existing factory fobs system on the Jeep Gladiator.
- Activate the vehicle unlock by pressing the unlock button on the vehicle three times. It should take the Jeep Gladiator about five seconds to start up.
- With the remote starter, the Jeep Gladiator will only remain ON for about 20 seconds, after which it will go OFF.
- You then press the unlock button once to open the door. You will see “Ready to Go” on the media center screen when you enter the vehicle.
Remote start not working?
Conclusion
It’s very common to run into problems with the key fob remote start in Jeep vehicles. There are several reasons which will hinder the Jeep remote start from working.
However, your knowledge of handling such occurrences can go a long way in escaping such situations.
