Alfa Romeo’s Front License Plate? (Things You Should Know)

It might seem a little strange when you buy an Alfa Romeo, and there’s no space allowed for license plates.

This is because the manufacturers of the Alfa Romeo Giulia designed the grill to resemble a short coat of arms.

This doesn’t leave space for the license plate; however, there is a provision by the side for the plate.

The options available for mounting License plates on your Alfa Romeo are the adhesive-mounted bracket and the tow hook bracket. The tow hook license plate can attach directly to the tow hook receptacle in the front bumper. Also, the adhesive-mounted bracket attaches to your bumper, permitting you to install a license plate onto your Alfa Romeo.

Can I Display My Front License Plate On My Dashboard? 

It is illegal to mount license plates on the dashboard in most places. Often, people consider the glass and windscreen as obstructions that can reflect the sun and distort vision.

This makes it difficult to see the number. License plate numbers are best fixed at the front and rear bumpers outside the vehicle. 

You can’t overemphasize the license plate number’s significance. Without it, your car would be limited to its parking space and cannot be driven around.

That thin piece of metal at the front and rear bumpers are evidence that your vehicle has been registered accordingly. This earns it the privilege for it to be on the road.

Let’s say you have two of your license plates; they can’t just be mounted anywhere you see fit.

The plates are government-issued documents, regulations are guiding their usage, and they are:

#1. Visible Mounting.

The rational thing to do is to fix them on bumpers. They are screwed or installed there to avoid meddling or unsanctioned removal.

They are set openly because they have to be readable. Therefore, plate numbers must have nothing covering them to enable readability. 

#2. Modification of license plate numbers is prohibited.

License plates should show the alphanumeric code in an identical design, format, and color outline approved by law. You can’t customize license plate numbers.

#3. Change any damaged or missing plate.

Make sure that you replace any damaged plate. Missing plates might attract the law, which would earn you a fine. Follow the necessary procedures on how to replace license plate numbers.

You might get a temporary authorized plate number that will expire after some months. This improvised plate number will be changed whenever the replacement plate is ready.

Also read: Does Alfa Romeo Giulia Have A Remote Start? 

How Do I Put A Front License Plate Without Drilling The Bumper?

Various locations around the world demand that vehicles have front license plates. However, not all car models have front license plate brackets.

There are choices available for these kinds of vehicles. The adhesive-mounted frame is obtainable. You could also opt for the bracket made for the shape of your specific car’s bumper.

Here are the procedures to install an Adhesive-Mounted bracket.

#1. Buy an installation bracket that matches the make of your car.

You could browse some sites or stop by local shops around you for a non-boring installation bracket that matches your car’s model.

Plenty of no-drill frames uses a tough adhesive that suits various car models. Other brackets only fit particular makes and features equipment that fastens the bracket on the fender.

Consult the manual of your product for precise fitting instructions.

#2. Mop the mounting area on your bumper using alcohol wipes.

The adhesive-installed bracket demands a spotless installation site. Determine the middle of your fender to know where you’ll fix the bracket.

Then, cleanse the area using alcohol wipes and let it dry naturally or wipe with a fresh microfiber cloth.

Specific brackets attach themselves to the anterior side of the fender. Others might stick to hollows or gaps exclusive to particular makes.

Consult the installation manual for the exact fitting location.

#3. Try out the fit but don’t remove the shielding film. 

There’s a protective film for the adhesive; this should be left in place as you try out the fit. Position the bracket over the installation area to ensure that it fits your model.

When it refuses to align with your vehicle’s bumper, it means you’ve probably purchased the wrong type of bracket. Replace it with the right frame.

#4. Remove the shielding film and push down the holder to the fender.

Remember, you can only do this after you have confirmed that the bracket matches your bumper. Peel away the shielding film to reveal the adhesive.

Push down the bracket securely onto the front area, underside, or any other installation area stated in your product’s directives.

Ensure that you attach the bracket exactly where it should be because you have only one chance.

#5. Fasten the plate number on the plate holder. 

With the bracket in place, you can line up its cavities with the cavities in your plate number.

If your bracket has a plate number frame, position it atop the license plate and parallel it with the cavities in the plate and bracket.

Fix the screws left to right inside the cavities to finish the installation.

Next up, we’ll look at the procedures for mounting a Tow Bar plate holder. 

#6. Find and take off the ductile sheet that conceals the tow hook hitch.

Various models have a plastic piece at the anterior bumper. You can hold it down to spring out a tow hook hitch behind the plastic part.

Also, there are license plate brackets that come with threaded studs. You can fit these studs into the anchor.

Nonetheless, ensure that you possess a tow hook hitch before purchasing a tow hook plate number holder kit.

#7. Fasten the gear’s tow hook bar.

Grasp the tow hook bar provided in your gear and attach the strung end to the anchor plug. Turn it left to right continuously till it’s tight and secure. Read our related post of Can The Alfa Romeo Stelvio Tow?

#8. Secure the bolt into the cavities in the plate holder and tow the hook bar.

You should line up the holes in the plate holder with the cavities in the tow hook bar. There’s a bolt in your kit that screws through these hollows.

Find it and urge it through the hollows to fasten the bracket with the tow hook bracket together.

Screw in the bolt from left to right using your fingers so it can have a hold in the hole. Then, using a ratchet, complete the tightening.

#9. Fix the plate number to the plate holder. 

The bracket is in position; all you need to do now is mount the plate number. If your product has a plate number frame, don’t forget to use it.

Put it atop the plate, send the screws into the plate, and frame, using the clockwise technique.

Also read: Alfa Romeo Infrared Windshield?

Tow Hook Front License Plate Install: Alfa Romeo Stelvio QV

Conclusion

Alfa Romeo vehicles do not come with space provided for license plates. You can use adhesive-mounted brackets or tow hook brackets to attach your license plates.

It is illegal to install a license plate on the dashboard in most cases. The windscreen blocks the license plates from view.

The methods of installing license plates without drilling bumper are using adhesive-mounted brackets and tow hook brackets.