Jeep Renegade Oil Change Light Won’t Reset? (Reasons & Solutions)

A lot of systems and components of your Jeep Renegade are moving engines. Therefore, a regular oil change is needed to maintain lubrication in those moving parts.

Lubrication is why oil is an essential addition to your car.

There is a need to change the oil after prolonged use. The Jeep Renegade oil-change light indicates when the change becomes necessary.

However, it is required to reset it to its default setting. What could be the reason for reset failure? 

A malfunctioning oil sensor is the foremost reason your oil change light might fail to reset. The oil sensor, in this case, does not account for the change in oil condition. This failure ensures the light stays on after change. So an oil change won’t reset your Jeep Renegade oil indicator.

What is the Jeep Renegade Oil Change Light?

The oil change light is an indicator on your Jeep information dashboard. It alerts you to situations that call for a change in your engine oil.

The oil change indicator is a valuable tool to ensure you don’t have to guess before changing your oil.

The lubrication system in your car is essential. Much of the movement in the engine is only possible due to lubrication.

Some parts of your engine need a little bit of friction to function optimally, and some need to move freely without friction. 

As you continue to use your engine, the oil reduces lubrication power. This reduction affects its efficiency, hence the need to change the oil.

The lubrication system uses a sensor to identify oil quality in your oil chamber. This sensor is ultimately responsible for your Jeep Renegade oil change indicator changes. 

Here are some key details about your Jeep Renegade Oil Change Light.

#1. Oil Changing Schedule

Oil change, for many, is often a function of mileage or inspection. Some vehicle users tend to change their oil after a particular mile mark.

For drivers that use their cars frequently, assessment replaces mileage as the criteria for the light change. 

There are two different options for drivers who like to change the oil before the warning lights indicate. 

Some vehicle owners change the oil after reaching the 5000 miles mark. However, the range is always between 3000 miles and 5000 miles for many users. 

Oil inspection is another method for many drivers. The oil in its purest form is golden amber in color.

A used oil needing change is often dark in color and rough in appearance. Anything close to this color and the user drives in for an oil change.

#2. Changing the Oil

The oil change process is not a simple procedure. However, it does require input from professionals.

This input is because each engine type requires a specific oil for optimal function.

Therefore, if you have a new vehicle, you need information from your auto mechanics to identify the type of oil suitable for your car. 

Getting the right type and grade of oil can be vital to reset your oil change indicator after a change. After the first change, you can continue to use the same oil type. 

Note that the oil type is not the same for all Jeep Renegades. The oil type often depends on the model year. Does Cadillac XT5 Require Synthetic Oil?

Vehicles of different models have different engine types, ergo different oil types. 

Some Jeep Renegade of the same model year often has two different engine options. That will also require specificity in oil types suitable for the two engines.

Oil change requires draining the old and replacing it with the new. Therefore, it is best to drive your car to any local auto mechanics as soon as possible for maintenance.

#3. Oil Indicator Reset

After changing your oil, it is essential to reset the indicator and have it back in default mode. It is the last process.

The light reset maintenance is crucial because it shows that the oil change has taken effect. 

A subsequent indication is another reason you need to reset your Jeep Renegade oil indicator. It helps to alert you when next you need a change.

The reset is a simple process. Here are the steps involved:

• First, park your car after an oil change and shift the transmission to park mode.
• Next, turn the ignition switch to “on” (or run) mode but do not start your engine.
• Push the accelerator or gas pedal down thoroughly and slowly three times within 10 seconds.
• Reset the engine ignition to off, and then turn it on again.

After these simple steps, you should start your vehicle and check if the indicator is off. The indicator coming off shows your car is ready to hit the road again.

If the light doesn’t come off, you can repeat the process a few times.

If the oil change light won’t reset at this point, then your Jeep Renegade needs further inspection to determine the cause.

Why Won’t My Jeep Renegade Oil Change Light Reset?

The oil change light or indicator is one of the many Jeep service lights that draw attention to your engine and its components.

A scheduled oil change should be enough to help reset the indicator. However, this is not always the case.

Based on the frequency of occurrence, these are some reasons why your indicator might fail to reset.

#1. Faulty Sensor in Oil Pump

The sensor in the pump accesses the oil quality, and it calculates the crudeness and viscosity of this oil. This calculation helps determine when you need an oil change.

However, a dirty sensor might fail to recognize when you make such changes. 

Dirty sensors are often a result of prolonged use of dirty oils. The longer it takes you to change your oil after indication, the more likely you will damage the sensor.

A sensor can also malfunction due to prolonged. This malfunctioning will prevent indicator reset.

#2. Oil Grade and Type

Using the wrong oil type and grade can also prevent your vehicle system from resetting the indicator. You must use the correct oil when replacing your used oil.

The oil type is often in terms of viscosity at specific temperatures. 

Using another oil grade might affect your engine, keeping the oil indicator from resetting. 

#3. Faulty Maintenance Procedure

If your Jeep Renegade oil change is improper, it prevents the engine reset. This error might happen due to a lack of expertise or errors during an oil change.

In addition, incomplete drainage of old oil can mix old oil with new. This mixture leads to error and prevents indicator reset.

The Inspection Solution

Comprehensive inspection can help to solve the problems relating to indicator reset. Schedule an oil reset maintenance appointment and check your car.

This inspection will help identify errors and the necessary steps to correct them. 

If the initial error resulted from a faulty maintenance procedure, there is a need to change. You might need to take your Jeep to trusted professionals to ensure complete inspection.

If you have a new vehicle with a warranty package, using that option for checkups might be the best idea.

A detailed checkup will indicate if there are parts to buy or if all you need is a proper oil change.

How To Reset The Oil Change Alert Jeep Renegade

Final Thoughts

Your Jeep Renegade uses an automatic system to alert you to oil changes. Therefore, it is essential to make the required changes as soon as possible.

This change will help to keep your vehicle roadworthy. 

Several issues can prevent the oil indicator from being reset. But it’s noting a few hours at a seasoned auto mechanic won’t fix.