Will Jeep Gladiator Wheels Fit On A JK? (Let’s See)

Due to the popularity of the Gladiator and JK, the spare parts of these Jeep series usually aren’t hard to find.

Still, for a wide range of reasons, you may find yourself or have found yourself in a situation where you need to get a new wheel for a JK, and you can only find wheels for the Gladiator.

It may also be that Gladiator wheels at your end are cheaper than JK wheels. Well, can they fit?

Jeep Gladiator Wheels can be used for the Jeep Wrangler(JK) as they fit perfectly. It’s almost as if everything related to Gladiator wheels was produced with those of the JK, as you can hardly tell the difference when it’s fixed. 

Will Gladiator Wheels Fit On A JK?

The wheels of the Jeep Gladiator can fit on a JK.

Although I must say that switching the wheels of the JK for the Gladiator is a surprising choice as many would agree that the wheels of a JK are superior in so many ways.

Yes, you can replace Jeep Wrangler wheels with Gladiator wheels. The only issue you’ll have to deal with is the lug nuts of the Jeep Gladiator.

I know that it’s almost as if the wheels were produced together and separated for the two Jeep vehicles. But that doesn’t seem to extend to the nuts, unfortunately.

So if you’re going to be getting Wrangler wheels, you’ll need to get everything that comes with it.

I researched the features of both wheels to know if one can replace the other, but the application of knowledge is a whole different thing.

So I searched all over the net for people who, for whatever reasons, have done so in the past. The majority of the reviews were good, but two things kept coming up. 

Firstly, if you’re going to run Gladiator wheels on a Wrangler, you should steer clear of the Rubicon trim.

It still can be used for the JK, but it is much more complicated as the wheels of the Rubicon are the biggest amongst all the Gladiator trims.

If you’re going to be using Rubicon wheels on a Jeep Wrangler(JK), you may need suspension lifts.

Rubicon wheels-JK body-suspension lifts are the perfect combo.

Many people who’ve tried this out have positive results as the JK has an increased feeling of power, while the most common problems of using suspension lifts aren’t noticeable.

If you’re going to be replacing base trim JK tires, ensure you replace them with base trim Gladiator tires.

If your Wrangler is one of the high-end trims with slightly bigger tires, you can opt for the Rubicon tires. 

The bigger the mismatch, the more challenging it is. To get a better sense of the possibility of Gladiator wheels perfectly fitting into your JK, check out all its features on the Jeep website.

Once you open the website, try searching for your car model; when you find it, you should find a section in its features that covers the tires.

Alternatively, you can get the build sheet of your car using your VIN.

The second thing you should note, which I’ve already mentioned, is the lug nuts issue. You’ll need to get the lug nuts of the Gladiator.

Are Gladiator And Wrangler Wheels The Same?

They are almost entirely the same. The only difference between the wheels is the lug nuts.

I can’t tell what’s different about the lug nuts, but when you use the lug nut of a Jeep Gladiator Wheel on a Wrangler wheel, it doesn’t engage properly.

However, even when it doesn’t engage completely, it’s still firm enough for you to drive with it. Besides the lug nuts, the tires were made together and shared for the two Jeep series. 

For example, the wheel of a Jeep Gladiator Rubicon perfectly fits into a Jeep Wrangler Rubicon, so I guess it’ll be accurate to say that the tires of Gladiators and Wranglers are 90-99 percent similar.

In addition, trims of the same name are more similar. That means that if you have a SportS trim from the Wrangler and want a Gladiator wheel, ensure you get a SportS trim wheel.

What Is The Bolt Pattern On A Jeep Gladiator And Jeep Wrangler?

If you plan on changing the wheels that came with your vehicle, information like size, lifts, and the distance between the fender and the ground, you should consider the bolt pattern.

I’ll be discussing the bolt patterns of two of Jeep’s most famous series, the Gladiator and the Wrangler.

I’ll be covering everything you need to know about the bolt patterns of these series down the years. Let’s get to it then. 

#1. Jeep Wrangler Bolt Pattern

Finding the bolt pattern of any car is quite easy, and this is also the case for the Wrangler. You first need to count the mounting holes your wheel(s) possess(es).

For the Wrangler, it is five. Of course, most modern vehicles have five, too, so you can decide to skip the counting, but it’s always better to be double sure, so still make the counts.

That’s not all there is to bolt pattern, though; keep reading.

While all Jeep vehicles, or at least the recent ones, have five lugs, the spaces between vary from model to model and, in some cases, from trim to trim.

For the Jeep Wrangler, the spacing is five inches; this means that the bolt pattern of the Wrangler is 5X5.

Are you interested in knowing how to quickly and accurately tell the bolt pattern of a wheel without any assistance?

I’ve got you, and I’ll discuss that in this article, too, but before that, let’s talk about the bolt pattern of the Jeep Gladiator.

#2. Jeep Gladiator Bolt Pattern

The Jeep Gladiator has had one bolt pattern since its first model, which is 5X5(5X127). Every Jeep vehicle I know has a bolt pattern of 5X5.

It seems intentional because this doesn’t even change in the high-end trims like the Rubicon and co. So yes, 5X5 for the Gladiator. 

So before getting a new set of wheels to up the looks of your vehicle, ensure they’re 5X5 too, or you’ll have to run pattern extensions or shorting, and trust me, that isn’t something you want to do.

I would never change my Jeep Gladiator wheels, though; that dark and powerful look it has is perfect for me.

#3. Trick For Measuring Bolt Pattern

Measuring the bolt pattern of your wheels isn’t difficult. You don’t have to turn to forums on the internet anytime you want to find out the bolt pattern of a wheel.

It’s quite simple, and right now, I’ll show you how to tell your pattern in under a minute.

First off, confirm how many lug nuts it has. It is quite straightforward, and it’s five for the wheels I’ve covered. Next is to feel the outer edge of your wheel’s stud.

Find out the inches between that spot and the center of the opposite stud. It will mean that there’ll be one lug nut between the two lug nuts you’re measuring.

So if the length is 5 inches and you’ve got five lug nuts, it’s a 5X5 bolt pattern. If it’s 4.5 inches and you’ve got five lug nuts, it’s a 5X4.5 bolt pattern. Does Jeep Renegade Have 4 Wheel-Drive? (Let’s See)

What Size Wheel Should You Put on Your Jeep Wrangler or Gladiator?

Conclusion

People change their wheels for many reasons, with the most common being that wheels have worn off.

Changing your wheels simply because you want stronger and more powerful-looking tires is becoming just as common.

Whatever yours is, always ensure you check the bolt pattern before buying a new set of wheels, or you might waste your money. Good luck!