How Much is an Oil Change For an Alfa Romeo Giulia? (Explained)

The Alfa Romeo is an exciting car. If you’re interested in buying one or have one already, you’ve made a good choice. Like every car, the Alfa Romeo Giulia requires top-notch maintenance.

This will enable it to perform outstandingly, and one of the essential maintenance obligations is changing the oil.

It costs about $249 for oil service on an Alfa Romeo Giulia. Qualified Alfa Romeo technicians change the Genuine Alfa Romeo Premium oil. And this oil keeps the engine running smoothly and efficiently.

How Much Does it Cost for an Oil Change for an Alfa Romeo Giulia?

Alfa Romeo Giulia

Changing the oil on your Alfa Romeo Giulia costs about $249. The manufacturers specially produced the Genuine Alfa Romeo Premium oil for the Alfa Romeo.

It delivers ideal performance, safety, and economy. Engine oil greases the moving parts in the engine. When you’re low or out of oil, components can grind against each other.

This causes a build-up of heat and can eventually cause engine failure.

The Alfa Romeo oil lessens friction amid engine components and sustains the right temperature for the engine. It also stops the accretion of detrimental substances inside the engine.

Technicians will change the oil, examine the oil filter and top any other fluids that might be lacking.

How Often Does Alfa Romeo Need Oil Change?

The frequency guidelines of the Alfa Romeo oil change advise that you should replace the oil every 5000 miles.

Although you can adjust how much you change the oil if your vehicle works to its limits. These uses can be;

  • Performance driving or racing.
  • Commercial activities
  • Carrying heavy loads or towing.
  • Driving on dirt roads.

Most people consider oil to be the engine’s essence. The purpose of the oil is to act as a lubricant for all parts of the engine that move and grind.

This helps mitigate the heat build-up. Also, if you detect any of the following, take your vehicle for service.

  • Too much smoke coming out from the exhaust pipe.
  • The engine is overheating.
  • “Oil lamp” or “check engine” lights are indicated.
  • Perceiving burnt oil.
  • Oil’s color has changed, or the presence of small pieces of metal in the oil.
  • Engine misfiring and engine knocking.

How to Change The Oil on Alfa Romeo Giulia?

You’ll need some tools to change the oil on Alfa Romeo Giulia. They are;

  • T27 bit. This is used with a cordless screwdriver to loosen screws that hold the engine belly pan.
  • T27 socket and 1/4″ drive ratchet. After changing the oil, this is used to screw in the T27 screws by hand.
  • 13mm ratcheting combination wrench. You can use it to take out an oil drain plug or slim ratchet and socket. This is also called the gear wrench.
  • 1/4″ drive 13mm 6-point socket and ¼” drive torque wrench. Used to fasten drain plug to 15 ft-lbs or 20 N-m
  • Oil filter removal tool. This performs the function of a vise grip.
  • 0W-30 full synthetic oil, which meets European spec ACEA C2, C3 for the exhaust system.
  • Mobil 1 oil filter M1-113A or the OEM Mopar MO-339 filter (OEM part no. 04892339AA).
  • Oil drain plan or graduated plastic bucket, plastic bag, and cardboard papers to place on the floor of your garage. You also need nitrile gloves.
  • Wheel clocks. 20 Lynx Levelers (RV leveling blocks). You can use this to make humps for the front tires and thin camper humps for the rear tires.

    This will help raise the car a few inches to enable you to complete the job.

Here are the procedures on how to change the oil:

  • You should drive the car around for minutes to heat the oil to operating temperature.
  • Drive-up on appropriate ramps or over a pit. Put the gear in park and wedge rear wheels for safety.
  • Remove the engine belly pan by loosening 19 screws (according to the Alfa Romeo diagram).
  • Do this using a T27 bit and cordless impact driver or other hand tools.
  • Undo the seven screws in front of the belly pan and continue towards the rear, finishing with the two screws on either side close to the wheel arch trim.
  • To take out the pan, slide it forward some inches to remove it from the edges of the wheel arch covers.
  • Sag the rear edge of the pan, then glide it towards the back of the car to free it from the front air dam lip.
  • Remove the oil drain plug using the 13mm gear wrench or slim socket wrench. Inspect the red elastic washer change it if it’s torn, worn out, or looks different.
  • If the oil flow becomes slow, take out the filter with an oil filter wrench. Ensure that the gasket comes off with it.
  • When all the oil has flowed out, replace the drain plug.
  • Torque to 20 N-m (that’s 15 ft-lb) with 1/4″ drive torque wrench and 6 points 1/4″ drive.
  • Install a new oil filter, torque to 10 ft-lbs, or fasten according to the directions you see on the filter. (Gasket contact plus ¾ spin for the Mobil 1 filter; contact plus 3/4-1 turn for the Mopar filter.)
  • The volume for oil on Giulia is 5.5 quarts; fill up to 5 quartz. Next, add eight oz increments per the engine oil level screen in the infotainment display. 
  • Start the car and examine for leaks. If you don’t find any, put back the engine belly pan by sliding the front lip beneath the air dam.
  • Then, slowly slide toward the rear while supporting the rear pan edge under the wheel arch trim on either side. This is where you’ll find seven screws.

Secure loosely using two screws on either side at the rear. Operate forward implanting screws by hand and leaving loose so the belly pan can be tuned if needed.

  • Finish with the seven screws found by the front edge of the pan. Fasten the screws by hand, finger tight.

    The fasten all by hand cautiously with 1/4″ drive ratchet using 3/8″ drive adapter to the 3/8″ drive T27 socket.

  • Ride the car warily down the ramp. Drive for some minutes to warm to operational temperature.

    Inspect the oil level on a monitor and add by 8. Oz till it gets full.
  • Reset the oil monitor.

How Much is Maintenance on an Alfa Romeo Giulia?

For the first year, maintenance service on an Alfa Romeo Giulia costs about $80. You should carry out the following checkup on the car.

  • Perform tire rotation
  • The battery’s charge status is examined.
  • Look at the tire condition.
  • Using a diagnostic tool, the engine control system operation is checked.
  • The status of exterior lights is checked.
  • Fluids are checked and topped off if necessary.
  • The position and wear of the front and rear windshield wiper blades are checked.
  • The wear of front and rear disc brake pads is examined together with the operation of the pad wear signals.
  • The accessory drive belt is scrutinized for tensioning.
  • Inspection on everything about brake discs.

For the second year, the Alfa Giulia Romeo maintenance service costs about $340.

The first year inspections above are performed here together with:

Additionally, third-year maintenance for the Alfa Romeo Giulia costs about $180. The first-year inspections are done here, together with engine air filter replacement.

The fourth-year maintenance for the Alfa Romeo Giulia costs about $340. Here the second-year inspections are performed.

Furthermore, the fifth-year maintenance for the Alfa Romeo Giulia costs about $80. This only requires the first-year inspections.

The sixth-year maintenance for the Alfa Romeo Giulia costs about $700. You would perform the second-year and third-year inspections here.

Alfa Romeo Giulia Oil Change Cost – VA vs other States

Conclusion 

It costs about $249 for oil service on an Alfa Romeo Giulia. The oil on the Alfa Romeo Giulia is changed every 5000 miles. Also, if the vehicle works to its limits for a long time, it’ll require an oil change.

Similar Posts