Honda Ridgeline Remote Start Not Working? (Let’s See)
A remote starter is a great technological assist to preheat or cool your vehicle, as the case may be, depending on the weather.
However, all automotive systems, with time, begin to go haywire. The remote start system is not an exception.
Honda Ridgeline Remote Start may not work if you don’t use the Honda Ridgeline button start properly, the fob battery is weak or dead, your key fob is in the car, and you make too many attempts.
What Would Cause A Remote Start Not To Work?
The remote start feature is a keyless entry remote, and if vehicle owners adhere to the instructions as programmed, it will continue to function very alright.
But like all automotive systems, the remote start goes awry with time, and this is due to certain conditions that factor into it.
You don’t have to panic because what would cause a remote start not to work despite the respect it commands could also be corrected.
Some of these causes include:
#1. Remote Start System Is In Valet Mode
The remote starter is a programmed feature and could be switched to different modes on the operator’s command.
However, most owners or drivers put their vehicles in valet mode accidentally.
For example, if you put your remote in the pocket or purse, you might rest your hands on it, thus pressing the combination of buttons on it unbeknown to you.
This act switches the remote starter to valet mode, which hinders functionality.
#2. How Do I Know That My Remote Starter Is In Valet Mode?
You will know when you note the symptoms. The Lock and Unlock buttons still function very well, but pushing start on the fob doesn’t respond accordingly.
Additionally, many remote car starters go into valet mode following the vehicle’s disconnection for service.
The Honda Ridgeline remote start also has valet mode. You can put it in this mode so that the vehicle will not remote start, which will allow you to perform other specific functions.
I advise you to do this when you want to service your car. Please click right here for more information.
Remember I told you not to panic because you can exit valet mode by pressing the Lock + Trunk buttons on the fob.
The parking lights should flash twice after you must have pressed these buttons.
Proceed to push the Start button, and you will have your Honda Ridgeline returned to its original remote start mode.
Other brands have a special switch beneath the dashboard that can carry out this activity.
Unfortunately, the remote starter often does not revert to valet mode by accidentally pressing both keys on the fob but by accidentally hitting this switch underneath the dash as they drive.
Nevertheless, you can rectify or call this to order by simply flipping the switch in the opposite direction.
#3. Improper Use Of Remote
The starting procedures for many remote starters are not the same. For example, with a push on the remote start button on the key fob, you can activate some remote start systems, whereas others require two pushes.
And some remotes require you to push and hold down the button for a while to make the engine start.
To this end, when you use the remote presumptuously, it poses a threat to the system. And might not work following the operator’s inability to comply.
Therefore, If your remote starter isn’t working, check whether you are using the remote properly.
#4. Hood Pin Has Broken Or Failed
When the installed vehicle hood pin breaks or fails, this destabilizes the remote starter.
In addition, the hood pin is not uniform for all car brands, and in some cases, you can replace it with a tilt switch.
When you press start, you can tell whether your remote starter’s problem is a broken or failed pin, but the parking lights flash several times instead, and the engine doesn’t start.
However, the Lock and Unlock buttons still function normally.
#5. Remote Is No Longer Programmed
Every programmable system becomes useless when it loses programming, and so does remote start.
You begin to notice that your remote has lost programming if no button on the remote results in any response.
No matter how careful or reckless you press, you realize that there is no outcome.
What Causes The Remote To Lose Programming?
Your key can lose programming, although it’s rare. The situation results from certain reasons, such as using a dead battery.
The remote start has a retentive memory that stores remote control codes and other programming features like any computer device.
Even though this is unfortunate, do not panic because it’s a situation you can easily resolve.
When your remote loses programming, quickly call your remote starter installer, and you might be told right there on the phone how to reprogram it.
#6. When Vehicle Is Not In Park
There’s no denying that many people are aware of this option, however, do not underestimate its effect on the remote start.
If your vehicle is not parked, it might be impossible to start. Therefore, keep your vehicle in Park if you must start your car remotely.
#7. Your Key Fob Is In The Car
It’s funny but true. If your car’s key fob is somewhere with you in the car, it makes it impossible for you to start the vehicle remotely.
Don’t get it twisted; I’m talking about your car’s regular key fob. If you have both remotes in your car, the remote start won’t work. So take out the other fob, and make another try.
How Do I Reset My Honda Remote Starter?
Firstly, open up the back of your key fob remote and check the battery. Then wait for a few seconds, and insert the battery back in.
If it doesn’t work, move to the next option.
#1. Resetting Your Remote Starter
You can refer to the Owner’s Manual or click here to acquire hands-on information about your vehicle’s remote programming.
The feature comes with a remote start kit and many other interesting items. Then, having known the needful, gather all your car’s fobs: key fob remotes, and close the door as you sit in the driver’s seat.
- Insert your key into the ignition, turn it to Accessory, and push the Start button ONCE. Don’t push the brake pedal while doing that.
- Press the remote start Lock button on your remote-start fob.
- Turn your key on and then off again within five seconds. Or press the remote Start button and off again.
- Repeat the “on and off” process three or four times.
- You’ll hear a noise by the fourth time, after which you should select the Accessory position and be in programming mode.
- Pressing the Lock button on the remote starter fob, turn off your car within ten seconds.
- Now step out of your car and try. If it doesn’t work, you’ll need to drive to a dealership.
Common Remote Start Problems and Fixes
Conclusion
The technology behind the invention of the remote start system is doubtlessly a unique and life-make-easy one. It is, however, frustrating when it fails, that is, goes awry.
The Honda Ridgeline might not work if you do not properly use the remote start.
The remote start feature can be rendered useless despite the respect it commands if you fail to observe certain precautions.
