Does Ford F-150 XLT Have Push Button Start? (Let’s See)

It’s a known fact that vehicles need more security now than before, and drivers demand more comfort and convenience.

With that in mind, the need for intelligent access features can’t be underrated.

However, you can enjoy this feature and many more if Ford f150 XLT is in your possession. 

The Ford f150 model will have the factory’s push start button equipped in it. However, your car won’t start if you don’t apply the brake while using the push start button. Similarly, your push-start button won’t stop your vehicle if you do not put in gear P.

What Does XLT Mean on Ford?

XLT stands for Extra Luxurious Truck, and its designation dates back to 1970. The Ford F-100 came into existence years later, precisely 1973, and this separates the trim distinction from the basic XL model. 

Subsequently, by 2020, the new Ford XLT provides better interior and exterior performance.

For example, you can get a 3.0L power stroke diesel engine with XLT. In contrast, the XL model doesn’t come with that specificity. What is the Ford X Plan and Ford X Plan Pricing F150.

Does XLT Have Push Button Start? 

This feature isn’t standard fare in the XLT. What this means is that the XLT model doesn’t have a push-button start, so you will need to insert the key.

However, a skilled mechanic can help you add an aftermarket starting key feature. The installation requires little or no hassle.

All you need is the push-button kit, which has everything you need plus step-by-step instructions contained in the manual.  

How To Install an Aftermarket Push Button Start Ignition?

The push-button start kit is all you need to make your car have keyless ignition. Without this, you will not be able to carry out the installation process.

The kit has, along with it, a manual guide that contains step-by-step instructions that’ll help you throughout the installation process.

A diagram is also well presented on the placement and connection of each wire. 

Above all, make sure you follow the instructions that come with your kits because no kit has a similar installation process to another.

All the tools you’ll require for the installation of any kits are: 

• Multimeter
• Wire stripper
• Electrical tape
• Screwdriver
• Soldering iron 
• 10mm wrench.

Start by removing the steering cover. Then, while switching the multimeter to DC, place the “right” on the ignition harness and the “left” pin on the ground’s surface to check the voltage.

Secondly, mark all the wires using the guide diagram, then crank up your engine. Finally, start the car by turning the key in your ignition and checking the voltage using your multimeter. 

Next is to use your 10mm spanner to disconnect the battery’s negative terminal, proceed by removing part of the insulation of the wires, and make a hole in them with the wire stripper.

Hence, locate the corresponding wire, which is meant to go through the hole you just created using your instruction manual as a guide. Then, repeat the same process for all the wires. 

Connect the ring transponder to the brake switch wires to move this connection further. Then, in a like manner, connect the two systems with a regular transponder.

Finally, put back all the covers and wires in their place. Relax and enjoy starting your car with just a push.

How Does Push Button Start Work?

This feature lets you keep your key fob in your pocket, purse, or anywhere near the automobile and start, lock, or unlock your car.

The vehicle’s antenna sense and receive the frequency sent by the key fob validates it and allows you to press just a button (usually on the center console), then your car engine will start.

What Are Some Advantages of Push Button Start?

These are the benefits of a keyless ignition

#1. Hands-free operation

While shopping or coming back from the office,  your hands may be full of groceries and files. Here, nothing beats the ability to unlock your car with just a tap of a button.

However, this is possible only when you are close to the vehicle where the doors and the trunk should be accessible.

Consequently, this means you no longer have to worry about inserting your key into the door slot when you are in a hurry or when it’s raining. 

All you need is the key inside your pocket or purse to lock, unlock and even start your car. The frequency sensor is there to do the work for you.

#2. An added layer of security 

The unique signal coming from your key fob ensures no other key lock, unlock or start your car by giving authentication to the car’s computer.

Furthermore, you feel safer by knowing that your car requires a unique code to be accessible. Only when the code is received will the vehicle start it unlock. 

#3. Automatic locking

Vehicles with push-button start are made with a system that automatically locks the car the way it does when you press the door lock button or the key fob.

This locking method ensures more security, especially for those that usually forget to lock their vehicles after driving.

#4. Additional advantages

Many drivers have the problem of forgetting their car keys inside the vehicle and locking them unintentionally.

With this feature, you won’t have this difficulty again because the computer will recognize if your key is still inside your car.

As a result, the doors will not lock until you remove your keys from the vehicle.

What are some disadvantages of a push-button start?

#1. Misplaced Key Fob

One of the biggest issues of having a push-start ignition system is when you misplace the key fob.

In that case, you won’t be able to start or unlock your car until professional assistance arrives.

The complete keyless ignition system has to be changed if you do not get help from an expert on time. 

#2. Battery drain

 All wireless systems work with batteries. When your fob runs out of battery, the system will completely shut off, and you won’t be able to either get into the car or drive it.

Such a situation is extremely frustrating, especially when you’re already behind on time.

What Does the Ford XLT Package Include?

XLT comes with an array of available packages. It includes:

• Chrome bumpers and a grille.
• An automatic on/off headlamps and rain lamp wiper activation. 
• An 18inch cast aluminum wheels
• Lip moldings
• Chrome exhaust tip
• Body-color front fascia and wheel
• Aluminum wheels with magnetic painted pockets
• Heated mirrors and a power-adjustable driver’s seat
• Grey surround and background mesh
• A flow-through center console and floor shifter
• Black geometric appliques on the instrument panel and doors.

Conclusion

Push-button start is becoming increasingly popular and acceptable due to the added security and simplicity.

Notwithstanding, you’ve got to exercise extreme caution in knowing where to place your key fob.

Some users forget to turn off the vehicle, probably because the key fob is hidden somewhere in their pockets.

As a result, carbon monoxide may accumulate, which may cause a deadly situation when it gets into a house.